The Galaxy XCover6 Pro secrets revealed thanks to these renders & specs
That being said, if you check out the gallery below the article, you’ll get to see the device in a number of renders. Those renders are provided by Giznext and @OnLeaks, and they show the device from all angles. The Galaxy XCover6 Pro will feature a waterdrop display notch, and reinforced build. Two cameras will sit on its back, while you’ll find buttons on both sides. The power/lock and volume rocker buttons sit on the right. There is a separate key on the left, with a red accent, and another red key (possibly for Google Assistant) at the top. Samsung will use plastic to make this phone, or at least it seems like it. You can also see that a 3.5mm headphone jack sits at the top, and that the phone’s main speaker is bottom-firing.
It will be a tall, wide, thick, and heavy device
The source notes that the Galaxy XCover6 Pro measures 169 x 80 x 10mm, while it weighs around 235. So, it will be a lot of things, but a compact device is not one of them. It will be very tall, wide, thick, and heavy. This is a rugged phone after all, so that doesn’t surprise us. It is also noted that the Galaxy XCover6 Pro will ship with IP68 certification. In other words, it will be both water and dust resistant. Now, the source also shared some of the phone’s spec info. It is said that a 6.6-inch fullHD+ (2408 x 1080) TFT display will be a part of the package. That will be a 60Hz display, by the way, so don’t expect a high refresh rate. The Snapdragon 778G is said to fuel the device, while Samsung also plans to offer 6GB of RAM and 128GB of storage. A 50-megapixel camera will sit on the back, and be backed by either an 8-megapixel or a 12-megapixel ultrawide unit. A single 13-megapixel camera will sit on the front side of the phone. Android 12 will come pre-installed, while a 4,050mAh battery will also be a part of the package.
